The Beha PV8 WI-FI panel convector heater is stylish, compact and economical. This heater is ideal for heating a bedroom, study or any small room around your home.
The Beha PV8 WI-FI convector heater is 800 watt's and is designed to be wall mounted.
Beha with Wi-Fi thermostat, fits in to your home with style.
Colours available, White
System requirements: Wi-Fi router must be set up with 2,4 GHz og WPA2 under installation. In addition, the heater has the following functions:
- Splashproof (IP24) – The heater is approved for use in bathrooms if it is installed by a certified electrician
- Double insulated (Cl. II) – requires no grounding
- Protected against overheating – A fuse cuts the power if the internal temperature of the heater gets too high
- The temperature can also be adjusted locally on the heater, without a Wi-Fi connection
- Cable length 1,5 m
- 5 year warranty
Please note. It is important to check that the room intended for the installation of the heater has a strong wifi signal from the router. If not then this can be rectified by purchasing a plug-in wi-fi extender to boost the signal.
(please see our accessories page for a freestanding option)
PV8 WI-FI Convector Heater
|Depth (incl wall bracket)||8,3 cm|
|Distance between wall brackets||31 cm|
|Accuracy of the thermostat||0,2°C at 20°C room temperature|
|Front panel’s Surface temperature||Maximum 80°C at 20°C room temperature|
|Clear distance below the heater||10 cm|
|Clear distance sideways||2 cm|
|Clear distance above the heater||10 cm|
|Delivered with 1,5m long cable with plug|
|220 - 240 volt|
|On/off switch and electronic thermostat|
|Splash security IP24 (suitable for wet areas)|
The wall-frame depth 3,3 cm
Beha PV8 wi-fi
- Product Code: PV8 wi-fi
- Availability: 10